PNEUMATIC HEADS

- Retrofit equipment for TVP2

- Retrofit in new or retrofit for TVP2S

- Equipment for TVP3

The TEH advantages have been kept:

Roller diameter: 150 mm

Position of the lamellas at the top and bottom of the rollers

Tightening plates and lamellas design

Frame plate for the head

Bearing boxes on ramp guides

And even more advantages:

Fluid = air instead of oil

Jointless cylinders without maintenance (no piston, hence no internal leak)

A better design of safety

2 types of TEP heads for the 3 TVP:

- complete pneumatic technology for TVP2 and TVP2S

- electro-pneumatic technology with control of the pressure by the TVP3

Only one service side for the operator

Reduced maintenance

Double chain without lubrication for TVP2S and TVP3

Roller pinions with a double width

Standardization of the parts between the different models

The TEH inconveniences have been eliminated:

No more hydraulic device

No more oil leak

No more internal leak

No more difficult hydraulic maintenance

Pneumatic assistance:

2 blocks of jacks for the assistance of the higher and lower lamellas

2 blocks of jacks for the assistance of the side plates right and left

2 jacks for the assistance of the upper roller